STANDARDI ZA FOTOGRAFIJO (IN GRAFIČNO TEHNOLOGIJO), KI JIH POKRIVA TEHNIČNI KOMITE ISO/TC 42, V SLOVENIJI SIST/TC GRT (Odbor za grafično tehnologijo)
Standarde lahko naročite na spletnem naslovu www.sist.si v rubriki ISKALO SIST.
MEDNARODNI STANDARDI ISO
ISO Photography and graphic technology — Density measurements — Part 1: Geometry and functional notation |
ISO Photography and graphic technology — Density measurements — Part 2: Geometric conditions for transmittance density |
ISO Photography and graphic technology — Density measurements — Part 3: Spectral conditions |
ISO Photography and graphic technology — Density measurements — Part 4: Geometric conditions for reflection density |
I Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed |
ISO Photography — Processing chemicals — Specifications for anhydrous sodium sulfite |
ISO Photography — Processing chemicals — Specifications for potassium bromide — |
ISO Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate |
ISO Photography — Processing chemicals — Specifications for hydroquinone |
ISO Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate |
ISO Camera shutters — Timing — General definition and mechanical shutter measurements |
ISO Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification |
ISO Photography — Hand-held cameras — Flash-connector dimensions |
ISO Photography — 120-size and 220-size films — Dimensions |
ISO Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side |
ISO Photography — 135-size film and magazine — Specifications |
ISO Photography — Paper dimensions — Pictorial sheets |
ISO Photography — Paper dimensions — Rolls for printers |
ISO Photography — Films in sheets and rolls for general use — Dimensions |
ISO Photography — Roll film cameras — Back window location |
ISO Photography — Tripod connections |
ISO Photography — Determination of flash guide numbers for electronic flash equipment |
ISO Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes |
ISO Photography — Projector slides — Dimensions |
ISO Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries |
ISO Photography — Colour reversal camera films — Determination of ISO speed |
ISO Photography — General purpose photographic exposure meters (photoelectric type) — Guide to product specification |
ISO Photography — Film-based cameras — Automatic controls of exposure |
ISO Photography — Electronic flash equipment — Determination of light output and performance |
ISO Photography — Camera flash illuminants — Determination of ISO spectral distribution index (ISO/SDI) |
ISO Photography — Processing chemicals — Specifications for glacial acetic acid |
ISO Photography — Processing chemicals — Specifications for 1-phenyl-3-pyrazolidinone |
ISO Photography — Processing chemicals — Specifications for sodium hydroxide |
ISO Photography — Processing chemicals — Specifications for benzotriazole |
ISO Photography — Processing chemicals — Specifications for ammonium thiosulfate solution |
ISO Photography — Processing chemicals — Specifications for aluminium potassium sulfate |
ISO Photography — Processing chemicals — Specifications for sodium tetraborate decahydrate |
ISO Photography — Processing chemicals — Specifications for ammonium thiocyanate |
ISO Photography — Processing chemicals — Specifications for anhydrous potassium carbonate |
ISO Photography — Processing chemicals — Specifications for potassium ferricyanide |
ISO Photography — Processing chemicals — Specifications for potassium hydroxide |
ISO Photography — Processing chemicals — Specifications for potassium thiocyanate |
ISO Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite |
ISO Photography — Processing chemicals — Specifications for boric acid, granular |
ISO Photography — Processing chemicals — Specifications for potassium metabisulfite |
ISO Graphic technology and photography — Viewing conditions |
ISO Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications |
ISO Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements |
ISO Photography — Processing chemicals — Specifications for anhydrous sodium acetate |
ISO Photography — Medical radiographic cassettes/screens/films and hard-copy imaging films — Dimensions and specifications |
ISO Photography — Industrial radiographic films (roll and sheet) and metal intensifying screens — Dimensions |
ISO Photography — Electronic flash equipment — Automatic control of exposure |
ISO Photography — Direct-exposing medical and dental radiographic film/process systems — Determination of ISO speed and ISO average gradient |
ISO Photography — Colour negative films for still photography — Determination of ISO speed |
ISO 5800:1987/C Photography — Colour negative films for still photography — Determination of ISO speed — Technical Corrigendum 1 |
ISO Photography — Pre-packaged chemicals for the processing of silver halide based photographic materials — Vocabulary |
ISO Photography — Processing chemicals — Specifications for potassium sulfite, 650 g/l solution |
ISO Photography — Shutter cable release tip and socket — Dimensions |
ISO Photography — Photographic materials — Determination of ISO resolving power |
ISO Photography — Photographic lenses — Distance scale markings |
ISO Photography — Camera lenses — Determination of ISO colour contribution index (ISO/CCI) |
ISO Photography — Black-and-white continuous-tone papers — Determination of ISO speed and ISO range for printing |
ISO Photography — Processing wastes — Determination of boron |
ISO Photography — Processing waste — Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
ISO Photography — Processing waste — Determination of ammoniacal nitrogen (microdiffusion method) |
ISO Photography — Industrial radiographic films — Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation |
ISO Photography — Materials for direct-positive colour-print cameras — Determination of ISO speed |
ISO Photography — Illuminants for sensitometry — Specifications for daylight, incandescent tungsten and printer |
ISO Photography — Processing waste — Determination of hydroquinone |
ISO Processing photographic wastes — Analysis of cyanides — Determination of hexacyanoferrate (II) and hexacyanoferrate (III) by spectrometry |
ISO Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient |
ISO 7829:1986/C Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient — Technical Corrigendum 1 |
ISO Photography — Determination of ISO safelight conditions |
ISO Photography — Electronic flash equipment — Connectors to synchro-cord |
ISO 92 Photography — Sensitometry of screen/film systems for medical radiography — Part 1: Determination of sensitometric curve shape, speed and average gradient |
ISO 92 Photography — Sensitometry of screen/film systems for medical radiography — Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography |
ISO Photography — Vesicular microfilm — Determination of ISO speed and ISO range |
ISO Photography — Source document microfilms — Determination of ISO speed and ISO average gradient |
ISO 1 Photography — Flash exposure meter — Requirements |
ISO 1 Photography — Synchronizers, ignition circuits and connectors for cameras and photoflash units — Electrical characteristics and test methods |
ISO 1 Photography — Processing wastes — Determination of silver content |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 1: General |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 2: Determination of matter insoluble in water |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 3: Determination of matter insoluble in ammonium hydroxide solution |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 4: Determination of residue after ignition |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 5: Determination of heavy metals and iron content |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 6: Determination of halide content |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 7: Determination of alkalinity or acidity |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 8: Determination of volatile matter |
ISO 103 Photography — Photographic-grade chemicals — Test methods — Part 9: Reaction to ammoniacal silver nitrate |
ISO 1034 Photography — Photographic-grade chemicals — Test methods — Part 10: Determination of sulfide content |
ISO 1034 Photography — Photographic-grade chemicals — Test methods — Part 11: Determination of specific gravity |
ISO 1034 Photography — Photographic-grade chemicals — Test methods — Part 12: Determination of density |
ISO 1034 Photography — Photographic-grade chemicals — Test methods — Part 13: Determination of pH |
ISO 1 Photography — Root mean square granularity of photographic films — Method of measurement |
ISO 1 Photography — Processing chemicals — Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate |
ISO 111 Photography — Slide trays for projectors — Part 1: Straight slide tray, open type (European design) |
ISO 1 Photography — Sheets of sensitized material for the pre-press industry — Dimensions and related requirements |
ISO 113 Photography — Projection in indoor rooms — Part 1: Screen illumination test for still projectors |
ISO 113 Photography — Projection in indoor rooms — Part 2: Screen luminance test for still and video projection |
ISO 122 Photography — Electronic still picture imaging terminology — Part 1: Supplemental vocabulary |
ISO/TR 122 Photography — Electronic still picture imaging terminology — Part 2: Other defined terms |
ISO 1 Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
ISO 12232:2019/A Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index — Amendment 1: Determination of encoding-relative sensitivity (ERS) |
ISO 1 Photography — Electronic still picture imaging — Resolution and spatial frequency responses |
ISO 122 Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model |
ISO 122 Electronic still-picture imaging — Removable memory — Part 2: TIFF/EP image data format |
ISO 122 Electronic still picture imaging — Removable memory — Part 3: XMP for digital photography |
ISO 1 Photography — 110-size cartridge, film and backing paper — Dimensions |
ISO 13450:1996/C Photography — 110-size cartridge, film and backing paper — Dimensions — Technical Corrigendum 1 |
ISO 1 Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs) |
ISO 1 Photography — Room-light loading packages for electronic scanners and image-setting film and paper rolls — Dimensions and related requirements |
ISO 1 Photography — Aerial films and spools — Dimensions |
ISO 1 Photography — Dimensions of glass plates |
ISO 1 Photography — Transmission and reflection densitometers — Method for determining performance |
ISO 1 Photography — Composition of 135-size film canisters |
ISO 1 Photography — Electronic still-picture imaging — Noise measurements |
ISO 1 Photography — Electronic still picture imaging — Picture transfer protocol (PTP) for digital still photography devices |
ISO 1 Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag |
ISO 160 Photography — Spatial resolution measurements of electronic scanners for photographic images — Part 1: Scanners for reflective media |
ISO 160 Photography - Electronic scanners for photographic images - Spatial resolution measurements — Part 2: Film scanners |
ISO 173 Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) — Part 1: Stimuli, metrology and test procedures |
ISO/TR 173 Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 2: Considerations for determining scene analysis transforms |
ISO/TR 173 Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 3: User controls and readouts for scene-referred imaging applications |
ISO/TS 173 Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission system |
ISO/TR 173 Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 5: Colour targets including saturated colours for colour characteristic evaluation test for colorimetric image capture |
ISO 1 Photography — Processing chemicals — Specifications for 4-(N-ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
ISO 1 Photography — Digital cameras — Geometric distortion (GD) measurements |
ISO 1 Photography — Digital cameras — Shading measurements |
ISO 180 Photography and imaging — Inkjet media: Classification, nomenclature and dimensions — Part 1: Photo-grade media (paper and film) |
ISO 1 Photography — Digital cameras — Specification guideline |
ISO 1 Photography — Digital cameras — Image flare measurement |
ISO 1 Imaging materials — Processed silver-gelatin-type black-and-white films — Specifications for stability |
ISO 1 Imaging materials — Processed imaging materials — Albums, framing and storage materials |
ISO 1 Imaging materials — Films and paper — Determination of dimensional change |
ISO 1 Imaging materials — Processed films — Method for determining lubrication |
ISO 1 Imaging materials — Ammonia-processed diazo photographic film — Specifications for stability |
ISO 1 Imaging materials — Photographic films — Specifications for safety film |
ISO 1 Imaging materials — Photographic films and papers — Wedge test for brittleness |
ISO 1 Imaging materials — Photographic film — Determination of folding endurance |
ISO 1 Photography — Processed photographic colour films and paper prints — Methods for measuring image stability |
ISO 1 Imaging materials — Photographic film and paper —- Determination of curl |
ISO 1 Imaging materials — Processed safety photographic films — Storage practices |
ISO 1 Imaging materials — Processed vesicular photographic film — Specifications for stability |
ISO 1 Imaging materials — Permanence — Vocabulary |
ISO 1 Imaging materials — Photographic film and papers — Method for determining the resistance of photographic emulsions to wet abrasion |
ISO 1 Imaging materials — Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation |
ISO 1 Imaging materials — Processed imaging materials — Photographic activity test for enclosure materials |
ISO 1 Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide |
ISO 1 Imaging materials — Processed photographic plates — Storage practices |
ISO 1 Imaging materials — Thermally processed silver microfilm — Specifications for stability |
ISO 1 Imaging materials — Reflection prints — Storage practices |
ISO 1 Imaging materials — Compact discs (CD-ROM) — Method for estimating the life expectancy based on the effects of temperature and relative humidity |
ISO 1 Imaging materials — Processed photographic films — Methods for determining scratch resistance |
ISO 1 Imaging materials — Polyester-base magnetic tape — Storage practices |
ISO 1 Imaging materials — Test method for Arrhenius-type predictions |
ISO 1 Imaging materials — Optical disc media — Storage practices |
ISO 1 Imaging materials — Information stored on magneto-optical (MO) discs — Method for estimating the life expectancy based on the effects of temperature and relative humidity |
ISO 1 Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity |
ISO 1 Imaging materials — Unprocessed photographic films and papers — Storage practices |
ISO 1 Imaging materials — Wet-processed silver-gelatin type black-and-white photographic reflection prints — Specifications for dark storage |
ISO 1 Imaging materials — Pictorial colour reflection prints — Methods for evaluating image stability under outdoor conditions |
ISO/TR 1 Imaging materials - Recommendations for humidity measurement and control |
ISO 1 Imaging materials — Adhesive mounting systems — Specifications |
ISO 1 Imaging materials — Magnetic tape — Care and handling practices for extended usage |
ISO 1 Imaging materials — Multiple media archives — Storage environment |
ISO 1 Imaging materials — Colour images — Determination of water resistance of printed colour images |
ISO 1 Imaging materials — Processed colour photographs — Methods for measuring thermal stability |
ISO 1 Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability |
ISO 1 Imaging materials — Optical discs — Care and handling for extended storage |
ISO 1 Imaging materials — Digital hard copy for medical imaging — Methods of measuring permanence |
ISO 1 Imaging materials — Colour reflection prints — Test method for ozone gas fading stability |
ISO/TR 1 Imaging materials — Evaluation of image permanence of photographic colour prints in consumer home applications |
ISO 1 Imaging materials — Magnetic hard drives used for image storage — Care and handling |
ISO 1 Imaging materials — Reflection colour photographic prints — Test print construction and measurement |
ISO/TR 1 Imaging materials — Pictorial colour reflection prints — Comparison of image degradation observed between ISO 18930 accelerated weathering test method and outdoor exposure |
ISO 1 Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness |
ISO 189 Imaging materials and prints — Abrasion resistance — Part 1: General rub testing methods |
ISO 189 Imaging materials and prints — Abrasion resistance — Part 2: Rub testing of photographic prints |
ISO 1 Imaging materials — Photo books — Test methods for permanence and durability |
ISO 1 Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions |
ISO/TS 1 Imaging materials —Photographic prints — Effect of light sources on degradation under museum conditions |
ISO 1 Photography — Digital cameras — Chromatic displacement measurements |
ISO 1 Photography — Digital cameras — Measuring low-light performance |
ISO 19093:2018/A Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation |
ISO/TR 1 Photography — Guidelines for reliable testing of digital still cameras |
ISO 1 Photography — Archiving Systems — Vocabulary |
ISO/TR 192 Photography — Archiving systems — Part 1: Best practices for digital image capture of cultural heritage material |
ISO 192 Photography — Archiving systems — Imaging systems quality analysis — Part 1: Reflective originals |
ISO/TS 195 Photography — Digital cameras — Texture reproduction measurements — Part 1: Frequency characteristics measurements using cyclic pattern |
ISO/TS 195 Photography — Digital cameras — Part 2: Texture analysis using stochastic pattern |
ISO 2 Photography — Digital still cameras — Battery life measurement |
ISO/TS 2 Imaging materials — Lenticular lens sheet — Measurements and specifications of dimensions |
ISO 204 Photography — Psychophysical experimental methods for estimating image quality — Part 1: Overview of psychophysical elements |
ISO 204 Photography — Psychophysical experimental methods for estimating image quality — Part 2: Triplet comparison method |
ISO 20462-2:2005/C Photography — Psychophysical experimental methods for estimating image quality — Part 2: Triplet comparison method — Technical Corrigendum 1 |
ISO 204 Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method |
ISO/TR 207 Photography — Photographic reflection prints — Part 1: Evaluation methods of image quality |
ISO/TS 207 Photography — Photographic reflection prints — Part 2: Evaluation of colour variation in printing |
ISO/TS 2 Photography — Lenticular print for changing images — Measurements of image quality |
ISO 209 Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems |
ISO/TS 211 Permanence and durability of commercial prints — Part 1: Definition of use profiles and guiding principles for specifications |
ISO/TS 2113 Permanence and durability of commercial prints — Part 21: In-window display — Light and ozone stability |
ISO 2 Photography — Electronic scanners for photographic images — Dynamic range measurements |
ISO 220 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 1: Architecture and requirements |
ISO 220 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) |
ISO/TS 220 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB) |
ISO/TS 220 Multimedia systems and equipment — Colour measurement and management — Part 2-2: Colour management — Extended RGB colour space — scRGB |
ISO/TS 220 Multimedia systems and equipment — Colour measurement and management — Part 2-1: Colour management — Default RGB colour space — sRGB — Amendment 1 |
Trenutno je objavljenih 210 standardov.